A frame is the fence wall of a kennel or run. Some call them panels.

Our frames are made of 3/4 inch inside diameter galvanized steel water pipe.

We never weld our frames!

Welding burns off the galvanized coating and causes premature rusting.
Most companies that weld their frames paint on a zinc coating that is supposed to stop the rusting, however paint can only cover the outside of the pipe.
What about the inside? Welding burns off the inside galvanization as well as the outside.
When the temperature changes condensation forms on the inside of the pipes and runs to the bottom of the frames and causes them to rust through.
With our clamps there are no welds and a slot between the two halves of the clamp allows water out, slowing the rusting process.
We designed our corner clamp to make it so the average person with common skills can build a frame.

Our clamp eliminates the need for welding!

. All you need to do is cut the pipe to length, drill through the clamp and pipe, and bolt it in place.
It clamps the pipes square for you!
Then cut your chain link mesh to size and lace it to the frame.
We provide more details on how to do this when you purchase our fittings.

We also custom build frames at our company in Ohio. They are shipped commercial freight and arrive ready to set up.